Series 100

Desiccant Dehumidification

To Contact Form

Prevent Corrosion, Mold and Mildew

Compact, lightweight and rugged, the DH Series 100 desiccant dehumidifier is an ideal unit for small room applications.

Flexibility
Flexibility
Customizable down to the last detail
The strong solution
The strong solution
Outdoor units with inverter technology.

Product Overview

At a glance

Applications

 

  • Military equipment storage
  • Pharmaceutical
  • Storage closets/rooms
  • Confectionary
  • Electrical and electronic vaults
  • Self-storage facilities
  • Glove-box assembly
  • Small area applications

 

Benefits
  • Reduces maintenance
  • Improves Mean Time Between Failure (MTBF) for electronic systems
  • Produces dry air to prevent corrosion
  • Prevents mold and mildew formation by humidity below levels at which moisture condenses on surfaces
Features
  • Solid construction: sturdy aluminum frame

  • Advanced silica gel desiccant rotor

  • State-of-the-art self regulating electric reactivation heater

  • Operates at 115 volt single phase

  • Control panel - on/off/auto switch with integral humidistat

  • Round air connections to accommodate standard size flexible duct

  • Made in the USA

Technical Data
Process Volume (CFM)100
Moisture Removal (lbs/hr)2.0*
Heater Watts1350
ESP Process (in wc).3
ESP Regen (in wc).3
Weight (lbs)42
Dimentions (L"xW"xH")25.25x15.94x17.07
Utilities115V/60Hz, 1ph
Full Load Amps13.0

 *@90°F / 75%RH inlet conditions

 

 

Prevent Corrosion, Mold and Mildew

The DH-100 units produce dry air to prevent corrosion, increase readiness, reduce maintenance, and improve Mean Time Between Failure (MTBF) for electronic systems.

With the DH-100 dehumidifiers, humidity can be controlled below levels at which moisture condenses
on surfaces, thereby preventing corrosion, mold and mildew formation.

The heart of the units is a state of the art, silica gel, desiccant dehumidification wheel. A self regulating, positive temperature coefficient (PTC) electric resistance heater is used for regeneration and low speed, low noise compact blowers are used to move supply and regeneration air throughout the unit. An adjustable humidistat provides relative humidity control and energy savings.

 

 

Principle of Operation

The operation of the DH-100 desiccant system is based on two counter current air streams flowing through a rotating desiccant wheel. Return air from the conditioned space is drawn through the rotating desiccant wheel. The desiccant adsorbs moisture from the air stream and the dry supply air is returned to the conditioned space. The moisture containing portion of the wheel rotates into the regeneration section. The desiccant releases the adsorbed moisture into the heated regeneration air stream which is then exhausted to the outside.

 

 

Standard controls across all products

STULZ E2 the standard microprocessor controller across all STULZ product platforms.  E2 provides precision monitoring and control of your mission critical environment. 

STULZ E2 Controller ties everything together

  • Designed specifically for precision control of mission critical environments

  • Multiple I/O capabilities for all major components to optimize control for energy savings

  • Supports universal BMS interface for remote monitoring (address readable) and remote control (address writable)

  • Capable of network controllers in a workgroup (pLAN) to work as one (no BMS required)

  • Pre-engineered controls for economizers and adiabatic cooling

Benefits

Backlit LCD alphanumeric display for visual indicationOptional UPS backup module
Operated via 6-key menus, in five different modesIndependent EC Fan and cooling control (CW valve or DX)
Unit functions for cooling, heating, humidifying and dehumidifyingCooling control sequence: return air temperature, humidity, supply air temperature, dew point
Three levels of restricted entry into the configurationFan control sequence: BMS, local/static pressure, and temperature based ( supply or return air)
Sensor inputs control inputs/outputsCapable of networking up to eight E2 controllers with an independent LAN
Additional I/O sensors and alarmsPsychrometric control provided as a user configurable temperature and humidity (relative humidity) or dew point control

STULZ E2 Controller communicates with BMS/BAS systems via the following protocols:

  • BACnet IP

  • BACnet over Ethernet

  • BACnet MS/TP

  • HTTP

  • SNMP V1, V2c

  • Modbus IP

  • Modbus RTU

Contact

Find your individual STULZ contact

  • File:
  • Language:
  • Date:

Related Products

Series 500

Learn More

Series 1000

Learn More

Series 2000

Learn More

Contact

Do you have any questions? We will be happy to help! Please call us or follow our contact form.

To Contact Form
To top